|
|
 One of the most important means to ensure the stability of performance parameters of the pressing unit is the control system. The main component of the control system is the pressing quality control system that ensures graphic and numerical registration of pressing parameters and displays in the screen the piston speed curves and piston path curves and pressure in the rod end of the pressing cylinder. It is possible to keep information in the form of tables and in the graphic form for 10 million castings in order to categorize them and for further analysis and printout.
High technical level of the equipment, wide range of technological capacities of the pressing unit and the control system, the safety of the elemental base of the hydraulic apparatuses and electronic apparatuses allow to use these machines for founding articles which require high responsibility.
The weight of the castings produced by high pressure casting is up to 6.5 kg. The maximum size: 700 x 700 x 500 mm, the precision of the castings conforms to class 2 to 4.
RIWord engage in development and production of press molds and tools for pressure casting, performs all the types of mechanical processing.
Measuring laboratories:
- Control and measurement laboratory ACCURA 10 (Karl Zeiss).
- Spectral laboratory for chemical analysis of elements of the alloy FOUNDRY – MASTER.
- Gas analysis laboratory ELTRA.
- Metallographic laboratory LOMO.
- Sector of preparation of metallographic sections (grinding machine, polishing machine; polishing desk, etching desk with exhaustion unit, cabinet for chemicals).
Software:
- Magmasoft
- UniGraphics
|
| Office 408, 2nd enter, 32a, Khoroshevskoje highway, Moscow, Russia, tel.: +7 (495) 648 0996, 6480997, 6480994; 648 0995 E-mail: riword@awax.ru |
|
